Video Intercom Door Station·User Manual
19
Figure 7-6 Adding by IP Segment
2. Click OK to search and add the devices whose IP addresses are within the range of
the defined IP segment to the device list.
Task 3: Add by Port No.
Purpose:
When you want to add multiple devices which access to the network via port mapping,
you can simultaneously add them by this method. In this way, you can add many devices
with the same IP address while with different port No..
Steps:
1. Select Port No. in the Adding Mode drop-down list, enter the IP address, define the
port No. range in the Start Port No. and End Port No. field, and set the user name
and password.
You cannot add the device(s) to the device list if the user name or password is incorrect.
Figure 7-7 Adding by Port No.
To Next Page
Loading...
Need help?
General
