Video Intercom Door Station·User Manual
26
User
Purpose:
You can edit the password to log in the device.
Steps:
1. Click to enter the delete, add or edit user interface.
Figure 7-19 Delete, Add or Edit User Interface
2. Select the user to edit and click to enter the user parameter interface.
Figure 7-20 User Parameter Interface
3. Input new password and confirm password in the textbox, and click Apply to
accomplish the editing of password.
The new password and confirm password should be identical.
After editing the password of device, click button from the device list, the added
device will not be there. You should add the device again with new password to
operate the remote configuration.
RS485
Click to enter the RS485 setting interface. You can view and edit the RS485
parameters of the device.
To Next Page
Loading...
Need help?
General
