HIKVISION DS-KV8402-IM User Manual

Video Intercom Door Station·User Manual
32
Volume Input and Output
Step:
1. Click Volume Input/Output button to enter the volume input and output interface.
Figure 7-26 Volume Configuration
2. Slide the slider to adjust the volume input and volume output.
3. Click the Save button to enable the settings.
Call Button
1. Click the Call Buttons button to enter the calling buttons settings interface.
Figure 7-27 Call Buttons Interface
2. Select the button number.
3. Enter the floor No. and the room No..
4. Click the Save button to enable the settings.
 For DS-KV8102-IM, DS-KV8102-IP, and DS-KV8102-VP, there is no need setting the
Room No..
 If enabling Quick Press for Calling Center, you should call resident by holding
down the call button, and call center by quickly pressing the call button.
7.4.3 Network
Local Network Configuration
Steps:

HIKVISION DS-KV8402-IM Specifications

General

Brand	HIKVISION
Model	DS-KV8402-IM
Category	Intercom System
Language	English