Video Intercom Door Station·User Manual
41
Adding by IP Address/IP Segment
Steps:
1. Click the Manual button to open the device adding window.
2. Enter the corresponding information (IP address, user name, password, start IP
address, end IP address).
3. Click the Add button.
Figure 7-39 Adding by IP Address/IP Segment
7.6.2 Upgrading Devices
There are 2 upgrading modes available: upgrading by file, and online upgrading.
For the villa door station, only upgrading by file is available.
Upgrading by File: You upgrade the device or devices via the local upgrade files.
Steps:
1. Select a device or multiple devices, and select “Upgrade by File” as the upgrading
mode.
2. Click to pop up the window for opening the upgrading file.
To Next Page
Loading...
Need help?
General
