HIKVISION DS-MP1301 User Manual

DS-MP1301 LCD Mobile Monitor
11
4.2 Configuring Parameters
4.2.3 Configuring Display Channel
Purpose:
By default, the video from the connected mobile DVR is displayed on the screen of the monitor when it is started
up. You can change the display channel of the monitor.
Steps:
1. Long press M button to enter the menu configuration interface.
2. Press ▲ or ▼ button to move the cursor to the Display Channel column.
3. Press OK button to select the Display Channel column.
4. Press ▲ or ▼ button to select the display channel from the Main Camera, Rear-view Camera and Other
Camera.
5. Press OK button to save the settings.
6. Long press M button to exit from the current interface.
7. Reboot the monitor to take the settings into effect.
4.2.4 Adjusting Screen Brightness
Purpose:
The screen brightness can be adjusted automatically or manually.
If the screen brightness has been adjusted automatically, you cannot adjust it manually unless you disable the auto
mode. Or if you have adjusted it manually, you cannot enable the auto mode.
 Auto Adjusting
Steps:
1. Long press M button to enter the menu configuration interface.
2. Press ▲ or ▼ button to move the cursor to the Auto column.
3. Press OK button to select the Auto mode and the screen will adjust the brightness automatically.
4. Long press M button to exit from the current interface.
 Manual Adjusting
Steps:
1. Long press M button to enter the menu configuration interface.
2. Press ▲ or ▼ button to move the cursor to the Brightness column.
3. Press OK button to select the Brightness column.
4. Press ▲ or ▼ button to select the brightness value.
5. Press OK button to save the settings.
6. Long press M button to exit from the current interface.

HIKVISION DS-MP1301 Specifications

General

Brand	HIKVISION
Model	DS-MP1301
Category	Monitor
Language	English