HIKVISION DS-PHA48-EP User Manual

11
3.1.1 System Settings
Time Settings
You can set the device time zone, synchronize device time, and set the DST time. The device
supports time synchronization via Hik-Connect server.
Time Management
Click System → System Settings → Time Management to enter the Time Management page.
You can select a time zone from the drop-down list.
You can synchronize the device time automatically with NTP. Check the check box of NTP Time
Sync., enter the server address and port No., and set the synchronization interval.
You can synchronize the device time manually. Or check Sync. with Computer Time to synchronize
the device time with the computer time.
Note
While you synchronize the time manually or with the computer time, the system records the log
“SDK Synchronization”.
DST Management
Click System → System Settings → DST Management to enter the Time Management page.
You can enable the DST and set the DST bias, DST start time, and DST end time.

HIKVISION DS-PHA48-EP Specifications

General

2G standards	GSM
Number of alarm zones	48
Alert notification type	SMS
Connectivity technology	Wired & Wireless
Mobile network generation	4G
Smartphone remote support	Yes
Number of simultaneous users	48 user(s)
Control type	-
Mounting type	Wall
Product color	White
Housing material	Plastic
Number of door/window sensors	- pc(s)
Battery life	36 h
Input voltage	100 - 240 V
Battery voltage	13.5 V
Battery capacity	7000 mAh

Weight and Dimensions

Alarm control panel weight	996.5 g
Alarm control panel dimensions (W x D x H)	261 x 86.4 x 261 mm