HIKVISION DS-PHA48-EP User Manual

100
2. Select an alarm and you can view the alarm details.
3. Optional: If the zone has linked a camera, you can view the playback when the alarm is
triggered.
4. Optional: Tap to search events by dates or devices.
3.4 Report to ARC (Alarm Receiver Center)
AX HYBRID PRO wireless control panel is designed with transceiver built in following the guidance
of EN 50131-10 and EN 50136-2. Category DP2 is provided with primary network interface of
LAN/Wi-Fi and secondary network interface of GPRS or 3G/4G LTE. ATS (Alarm Transmission
system) is designed to always use LAN/Wi-Fi network interface when available to save mobile data
usage. The secondary network interface provides resilience and reliability during mains power
failure.
Setup ATS in Transceiver of Receiving Center
Steps:
1. Login to the web client of the alarm receiver.
2. Click Configuration→ IP Reception, and create a receiving server as shown below.

HIKVISION DS-PHA48-EP Specifications

General

2G standards	GSM
Number of alarm zones	48
Alert notification type	SMS
Connectivity technology	Wired & Wireless
Mobile network generation	4G
Smartphone remote support	Yes
Number of simultaneous users	48 user(s)
Control type	-
Mounting type	Wall
Product color	White
Housing material	Plastic
Number of door/window sensors	- pc(s)
Battery life	36 h
Input voltage	100 - 240 V
Battery voltage	13.5 V
Battery capacity	7000 mAh

Weight and Dimensions

Alarm control panel weight	996.5 g
Alarm control panel dimensions (W x D x H)	261 x 86.4 x 261 mm