EasyManuals Logo
Home>HIKVISION>Security System>DS-PHA48-EP

HIKVISION DS-PHA48-EP User Manual

HIKVISION DS-PHA48-EP
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
21
4. Click OK.
5. Optional: Click the Lock icon to unlock the locked module.
3.1.2 Device Management
You can manage the enrolled peripherals including detector, sounder, keypad, etc. in this section.
Zone
You can set the zone parameters on the zone page.
Steps
1. Click Device Zone to enter the Zone page.
2. Click Enroll to add a zone.
3. Select Relate Mode.
Wireless
Enter Serial Number, and select Detector Type. Select Main Device Type and Main Device
Name. Click OK, it will start enrolling. Power on the detector and finish configuration in the
pop-up page. Click OK to add a wireless zone.
Wired
Select Main Device Type. Select Main Device Name and Channel. Click OK, it will start
enrolling. Finish configuration in the pop-up page. Click OK to add a wired zone.
4. Select a zone and click to enter the Zone Settings page.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-PHA48-EP and is the answer not in the manual?

HIKVISION DS-PHA48-EP Specifications

General IconGeneral
2G standardsGSM
Number of alarm zones48
Alert notification typeSMS
Connectivity technologyWired & Wireless
Mobile network generation4G
Smartphone remote supportYes
Number of simultaneous users48 user(s)
Control type-
Mounting typeWall
Product colorWhite
Housing materialPlastic
Number of door/window sensors- pc(s)
Battery life36 h
Input voltage100 - 240 V
Battery voltage13.5 V
Battery capacity7000 mAh
Weight and Dimensions IconWeight and Dimensions
Alarm control panel weight996.5 g
Alarm control panel dimensions (W x D x H)261 x 86.4 x 261 mm

Related product manuals