HIKVISION DS-PHA48-EP User Manual

49
2. Drag the slider to enable UPnP.
3. Optional: Select the mapping type as Manual and set the HTTP port and the service port.
4. Click Save to complete the settings
FTP
You can configure the FTP server to save alarm video.
Steps
1. Click Communication → FTP to enter the page.
2. Configure the FTP parameters
FTP Type
Set the FTP type as preferred or alternated.
FTP Protocol
FTP and SFTP are selectable. The files uploading is encrypted by using SFTP protocol.
Server and Port
The FTP server address and corresponding port.
User Name and Password
The FTP user should have the permission to upload pictures. If the FTP server supports
picture uploading by anonymous users, you can check Anonymous to hide your device
information during uploading.
Directory Structure
The saving path of snapshots in the FTP server.

HIKVISION DS-PHA48-EP Specifications

General

2G standards	GSM
Number of alarm zones	48
Alert notification type	SMS
Connectivity technology	Wired & Wireless
Mobile network generation	4G
Smartphone remote support	Yes
Number of simultaneous users	48 user(s)
Control type	-
Mounting type	Wall
Product color	White
Housing material	Plastic
Number of door/window sensors	- pc(s)
Battery life	36 h
Input voltage	100 - 240 V
Battery voltage	13.5 V
Battery capacity	7000 mAh

Weight and Dimensions

Alarm control panel weight	996.5 g
Alarm control panel dimensions (W x D x H)	261 x 86.4 x 261 mm