97
3.3.18 Wi-Fi Connection
You can make the AX HYBRID PRO connect to Wi-Fi through APP.
Steps
1. On the device list page, tap the AX HYBRID PRO and then log in to the device (if required) to
enter the page.
2. Tap → Configure Wi-Fi Network.
3. Follow the instructions on the page and change the AX HYBRID PRO to the AP mode. Tap Next.
4. Select a stable Wi-Fi for the device to connect.
5. Back to configuration page to enter the Wi-Fi password and tap Next.
6. Tap Connect to a network and wait for connection.
After the connection is completed, the AX HYBRID PRO will prompt to exit AP mode and
automatically switch to STA mode.
3.3.19 Check Alarm Notification
When an alarm is triggered, and you will receive an alarm notification. You can check the alarm
information from the mobile client.
Before You Start
● Make sure you have linked a zone with a detector.
● Make sure the zone is not bypassed.
● Make sure you have not enabled the silent zone function.
Steps
1. Tap Notification in the mobile client to enter the page.
All alarm notifications are listed in Notification page.
2. Select an alarm and you can view the alarm details.
To Next Page
Loading...
Need help?
General
