70
Push Notifications
When an alarm is triggered, if you want to send the alarm notification to the mobile phone, you
can set the notification push parameters.
Steps
1. In the site, tap the AX HYBRID PRO and then log in to the device (if required).
2. Tap → Communication Parameters→ Push Notification(s) to enter the page.
3. Enable the target notification.
Zone Alarm/Lid Opened
The device will push notifications when the zone alarm is triggered or the zone lid opened is
triggered or restored.
Note
You need to set event filtering interval time for phone calling.
Peripherals Lid Opened
The device will push notifications when lid opened of any peripherals is triggered or restored.
Panel Lid Opened
The device will push notifications when lid opened of the control panel is triggered or
restored.
Panic Alarm
The device will push notifications when panic alarm is triggered or restored by zones, keypads
or keyfobs.
Medical Alarm
The device will push notifications when medical alarm is triggered.
Fire Alarm
The device will push notifications when fire alarm is triggered.
Gas Alarm
The device will push notifications when gas alarm is triggered.
Panel Status
The device will push notifications when the control panel system status is changed.
Zone Status
The device will push notifications when the zone status is changed.
Peripherals Status
The device will push notifications when any peripheral status is changed.
Panel Operation
The device will push notifications when the user operates the AX HYBRID PRO.
To Next Page
Loading...
Need help?
General
