HIKVISION DS-TMG4B1 User Manual

Barrier Gate User Manual
20
Chapter 7 Remote Control
7.1 Button Description
The buttons are on the lower right corner of the control board.
Figure 7-1 Buttons
7.1.1 Independent Button
 Rise: To control the boom pole to rise. Hold it and the boom pole will not fall.
 Stop: To stop the boom pole.
 Fall: To control the boom pole to fall down.
 Learn/Delete: Hold it for three seconds to enter the remote control learning mode, and the
status indicator will flash in high frequency. Hold it for five seconds to clear all the learning
records.
7.1.2 Button Combination
The triggering sequence of the buttons is from left to right. When you trigger the button on the
right, the button on the left should be kept triggering status.
 Learn/Delete + Rise: In manual learning mode, press the buttons to learn rising limit position.
In auto learning mode, press the buttons to get the rising limit position, locate the falling limit
position and judge the boom pole direction automatically, and calculate the running time of
the barrier gate. When the status indicator is flashing in the frequency of 0.1 s, loosen the
buttons.
 Learn/Delete + Fall: In manual learning mode, press the buttons to learn falling limit position.
In auto learning mode, press the buttons to get the falling limit position, locate the rising limit
position and judge the boom pole direction automatically, and calculate the running time of
the barrier gate. When the status indicator is flashing in the frequency of 0.1 s, loosen the
buttons.
 Learn/Delete + Stop: Press them to enter the auto test status. When the status indicator is
flashing in the frequency of 0.1 s, loosen the buttons.

HIKVISION DS-TMG4B1 Specifications

General

Brand	HIKVISION
Model	DS-TMG4B1
Category	Automatic Barriers
Language	English