HIKVISION HiLook User Manual

Network PTZ Camera·Quick Start Guide
15
3.2.2 Activation via SADP Software
SADP software is used for detecting the online device, activating the
device, and resetting the password.
Get the SADP software from the supplied disk or the official website,
and install the SADP according to the prompts.
Follow the steps to activate the camera.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an
inactive device.
Select inactive device.
Input and confirm
password.
Figure 3-3 SADP Interface
Note:
The SADP software supports activating the camera in batch.
Refer to the user manual of SADP software for details.

HIKVISION HiLook Specifications

General

Brand	HIKVISION
Model	HiLook
Category	Security Camera
Language	English