HIKVISION iDS-TCE500-B Configuration Manual

5) Oponal: Click Draw Lane Line to restore to the default drawing.
6) Select area and click Draw Area. Click the le buon of the mouse to draw a rectangular or
polygonal frame, and then click the right buon of the mouse to save the area.
7)
Oponal: Click Draw Area to delete the current area.
8) Click OK.
Figure 1-16 Draw Lane Line
10.
Click Save.
1.7 Set
Applicaon Mode Detailed Parameters
1.7.1 Set Violaon and Incident Detecon
The device supports dierent violaon types detecon. You can select the violaon type(s) to be
detected under dierent applicaon modes, and set the corresponding parameters.
Network Trac Camera Conguraon Manual
26

HIKVISION iDS-TCE500-B Specifications

General

Brand	HIKVISION
Model	iDS-TCE500-B
Category	Security Camera
Language	English