HIKVISION iDS-TCM403-B/0832 Configuration Manual

1.5.3 Set Connuous Capture Parameters
Set connuous capture parameters to realize the connuous capture of the violaon behaviors.
Steps
Note
●
Not all the applicaon modes support connuous capture parameters.
●
The connuous capture parameters vary with dierent models. The actual device prevails.
1.
Go to Conguraon → Capture → Applicaon Mode .
2.
Select Applicaon Mode.
3.
Set connuous capture parameters.
Capture Pictures
The number of captured picture(s).
Occupy Emergency Lane Capture
Check it to capture emergency lane
occupaon violaon. One more picture will be captured
beyond the set number of captured picture(s).
Enable Low Speed Capture
Check it to capture the violaon of driving in the speed lower than Min. Speed Allowed.
Speeding Capture
Check it to capture the speeding violaon. One more picture will be captured beyond the set
number of captured picture(s).
Capture Interval
Set Interval (dm) (the distance between the adjacent captures) if you select Distance, and set
Interval (ms) (the
me between the adjacent captures) if you select Time.
Burst Times
The number of picture(s) for
connuous capture.
Interval
The me between the adjacent captures.
4.
Click Save.
1.5.4 Set Scene Mode
Set the capture type, capture mode, and speed detecon mode for the applicaon mode.
Network Trac Camera Conguraon Manual
23

HIKVISION iDS-TCM403-B/0832 Specifications

General

Brand	HIKVISION
Model	iDS-TCM403-B/0832
Category	Security Camera
Language	English