Quick Operation Guide of DS-7600NI-SE&V(P) Series NVR
19
Adding and Configuring IP Cameras
You should add and configure the online IP cameras to enable the live view and recording function.
Adding IP Cameras
You can search and add the online IP cameras by following the startup wizard, or according to the following steps.
Steps:
1. Enter the Camera Management interface.
Menu> Camera> Camera
Main Menu
2. To add the online cameras with same network segment:
1) Click Search to search the online cameras.
Camera Settings Interface
2) Check the checkbox of certain cameras to be added.
3) Click Quick Add to add the camera.
3. To add other IP cameras:
1) On the left side of the interface, you can enter the IP address, protocol, management port, and other
information of the IP camera to be added.
2) Click Add to add the camera.
Note: If you check the Synchronize IP Camera checkbox, the default settings of the NVR for the IP