Hisense 24D33 User Manual

Getting S
9 10
Main Menu Operation
Auto Scan
MENU: Skip EXIT:Exit
Scanning Ch26
Analog Channels Found: 0
Digital Channels Found:
DTV :18 Radio :0 Data :0
Auto Tuning Status
First tuning digital, press [Menu] button to skip digital tuning,
Second tuning analogue, press [Menu] button to skip analogue tuning.
Press [Menu] button to display the main menu.
Press [◄ / ►] button select Picture in the main menu,then press [OK / ▼] to enter.
Auto Scan
MENU: Skip EXIT:Exit
Scanning 145.25 MHz
Analog Channels Found: 3
Digital Channels Found:
DTV :19 Radio :1 Data :1
Picture Menu
1. Press [▼ / ▲] button to select the option that you want to adjust in the Picture
menu.
2. Press [OK /◄ / ►] button to adjust.
3. After finishing your adjustment, Press [Menu] button to return back to the previous
menu.
Picture Mode
Press [▼ / ▲] button to select Picture Mode, then press[◄ / ►] button to select.
(Available Picture mode: Standard,Soft,User, Vivid).
TIPS: You can press [Picture] button to change the Picture Mode directly.
Basic Features
Advanced Settings
Adjust advanced video features to fine tune
the picture.
Press [▼ / ▲] button to select Advanced
Settings, then press [OK / ►] button to
enter sub-menu.
Brightness/Contrast/ Sharpness/Saturation/Hue
Press [▼ / ▲] button to select option, then press [◄ / ►] button to adjust.
Brightness: Adjust the visual perception output of the entire picture, it will effect the
iuminousness of the picture.
Contrast: Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Sharpness: Adjust the peaking in the detail of the picture.
Saturation: Adjust the saturation of the color based on your own like.
Hue: Use in compensating color changed with the transmission in the NTSC mode.
Color Temp: Change the overall color cast of the picture.
Press [▼ / ▲] button to select Color Temp, then press[◄ / ►] button to select
Standard/Cool/Warm.
Standard: Produces a vivid image.
Cool: Produces a gentle blue-hued image.
Warm: Produces a red-hued image.
Zoom: Press [▼ / ▲] button to select Aspect Ratio, then press[◄ / ►] button to select.
Full, Zoom 1, Zoom 2, 4:3, Auto,Dot to Dot. To select the available display format.
Basic Features
Dynamic Contrast Medium
Dynamic Contrast
Automatically adjust picture detail and
brightness.
Press [▼ / ▲] button to select Dynamic Contrast , then press[◄ / ►] button to select .
(Available Dynamic Contrast : Off,Weak ,Medium,Strong ).
Backlight
Adjust backlight to suit light conditions in the room.Under low room
illumination, the use of lower backlight settings is recommended for reduced power
consumption and extended life of the flat panel of your television.
Sound Menu
Press [Menu] button to display the main
menu.
Press [◄ / ►] button select SOUND in the
main menu,then press [OK / ▼] to enter.

Hisense 24D33 Specifications

General

Brand	Hisense
Model	24D33
Category	TV
Language	English