Using the Sound Menu
Using the Time Menu
NOTES
NOTES
17 18
Basic Features Basic Features
Aspect Ratio: Adjust how the picture fills the
Noise Reduction: Select to reduce the noise
level of connected equipment: Off, Auto, Low,
Medium or High.
Dynamic Contrast: Automatically adjust
picture detail and brightness.
HDMI Mode: Adjust the HDMI output mode.
You can select Graphic or Video.
1. The Aspect Ratio option differs based on the input source.
2. You can only select the graphic in 'HDMI' mode. You can adjust the Aspect Ratio based
on a point-to-point ratio.
1. The option of “MTS” is only available in ATV.
2. The option of “Audio Language”is only available in DTV.
3. When “Auto Volume Control” is “On”, that means audio out control is activated.
You can adjust the following settings:
Sound Mode - Adjust the Sound Mode. You
can select Standard,Music,Movie,Sports,User.
Bass - Adjust the low frequency sounds.
Treble - Adjust the high frequency sounds.
Balance - Adjust the balance between the left
and right speakers.
MTS - Configure the multi-track sound. You
You can adjust the following settings:
Sleep Timer - Set a timer for the TV to turn off
automatically.
Time Zone - Select your time zone.
Daylight Saving Time - Set the daylight saving
time for your area.
Time Format - Select your time format.
Auto Clock - Select “On” for automatic date
and time setting using information from broadcast stations in your area.
Clock - Set the time manually when “Auto Clock” is “Off“.
Mono: Sets the sound to mono.
Stereo: Sets the sound to stereo when
stereo is not available, the sound is
automatically switched to mono.
SAP: Sets the sound to the second audio
program.
Audio Language - Select the language
supported by the chosen digital channel.
Digital Audio Output - Adjust the form of the
digital audio output. You can select 'RAW', 'PCM'
Using the Setup Menu
NOTES
Transparent
OSD Timeout
Closed Caption
Input Label
Other Settings
Restore Default
Setup Wizard
CEC
1. The option of “Closed Caption” is Only available under TV and AV source.
2. The option of “Over Scan” is Only available under DTV and Component Source.
You can adjust the following settings:
Menu language - Select TV Menu language.
Transparent - Adjust the transparency of the
OSD (on screen display) menu.
OSD Time Out - Adjust the duration of the
OSD (on screen display) menu.
Closed Caption - Adjust Closed Captioning
settings.
CC Mode - Turn Closed Captioning on/off.
Analog CC - Set Closed Captioning for standard (analog) program.
Digital CC - Set Closed Captioning for digital program.
Option - Adjust the digital Closed Captioning setting.
Surround Sound - Simulates surround sound and enhances bass response.
Speaker - Turn on/off the speaker of your TV.
Raw:Source code,the digital audio code is directly outputted,unprocessed.
PCM: A form of code, pulse code modulation.
Picture
Time
Setup
Lock
Channel
Sound
Sound Mode
Bass
Treble
Balance
MTS
Audio Language
Digital Audio Output
Surround Sound
Speaker
Standard
Mono
English
Raw
Off
On
50
50
0
Select Move Exit
Picture
Time
Setup
Lock
Channel
Sound
Auto Volume Control
Off
Select Move Exit
Auto Volume Control - Automatically adjusts volume to a consistent level;
attenuates loud passages.
screen based on the width and height.
can adjust the following settings:
or close it by selecting 'Off'
To Next Page
Need help?
General
