11
"TURBO" mode (SUPER)
When pressing the "SUPER" button on the remote control board, the
conditioner will start working in turbo mode for maximum cooling (in cool
mode) or for maximum heating (in heat mode). After 15 minutes, the mode is
automatically switched off, air conditioner continues to operate at a steady state.
Mode "HD Sensor control"
Air conditioner is equipped with the high precision maintain the desired
temperature near the user (if the remote control is located next to the user).
Sensor system in the indoor unit of split-system and remote control adjusts
the air conditioner. Device will be adjust the intensity of its work so that the
air temperature near the remote control corresponded exactly to the
specified settings.
HD sensor control function turns on and off automatically when you turn on
or turn off the air conditioner ( button on / off).
Regulation of treated air flow direction
Regulating the position of deflectors (blinds), set the direction of treated air flow
ensuring uniform distribution of temperature and the most comfort conditions
in the room. To change the position of deflectors, use the "SWING" button.
SILENT mode
Press the SILENT button, the unit enters SILENT mode. SILENT mode can be
set in COOLING, HEATING or FAN ONLY operation mode. SILENT mode will
be cancel SUPER (TURBO) mode automatically. Change operation mode
cancel SILENT mode.
NOTE
If there is a difference between set and actual air temperature in
DRY mode, the conditioner will automatically turn on in COOL or
FAN modes.
6
4.Pressing the "FAN SPEED" button on the remote control board, select the
fan rotation speed: AUTO, LOW, MIDDLE, HIGH, and the conditioner will start
working in accordance with the selected setting.
5.To turn the conditioner off, press the "ON/OFF" button once again.
In the FAN mode air temperature indoors is not set.
DRY
Turn the conditioner on pressing the "ON/OFF" button. Pressing the "MODE"
button, select the DRY mode. The conditioner will start working in the set
mode. To turn the conditioner off, press the "ON/OFF" button once again.
a) .
b) .
c)
.
*
.
**
,
3.
*,
: , ,
( )**.
1. «ON/OFF» (Power).
.
2. «MODE».
.
3. «FAN».
: «Auto»,
«High», «Middle», «Low».
«Auto»
.
.
«Low».
4,5. «TEMP» (/).
.
6. SWING . C
-.
7. «SWING» .
-. *
8. «SLEEP» (Night Care).
.
9. «SENSOR» (HD sensor control).
.
10. «TIMER».
( , TEMP -).
,
. ,
,
.
.
10
"Timer", .
"Timer" .
11. «TEMP DISP».
.
12. «IDM».
.
13. «SUPER».
,
18°
( )
32° ( ).
14. «DIMMER». C
.
15. «SILENT».
SILENT.
16. «HEATER». C
. *
17. «SOFT». C
SOFT.
*
«IDM» mode
Press the IDM button , the air conditioner switch between Normal
operation and Dual mode operation . In the dual mode operation, the air
conditioner compressor operates in limited maximum frequency , which
saves power consumption.
«Sleep» operation mode
Using this button, you can activate and deactivate the night operation mode.
When the night operation mode is activated, the air conditioner will work
according to the selected sleep mode.
This mode can be activated for cooling, heating, and drying operation
modes of the air conditioner.
The air conditioner will be switched off after 8 hours of operation in the sleep mode.
"Sleep 1" operation mode
In the cooling mode, the set temperature will be increased by 2°C for 2 hours
and then maintained constant.
In the heating mode, the set temperature will be decreased by 2°C for 2
hours and then maintained constant.
"Sleep 2" operation mode
In the cooling mode, the set temperature will be increased by 2°C, if the
appliance is working in the cooling mode.
Temperature will be decreased by 1°C after 6 hours of operation and then
decreased by 1°C after 7 hours of operation.
In the heating mode, the set temperature will be decreased by 2°C after 2
hours of operation, then increased by 1°C after 6 hours of operation, and
then increased by 1°C after 7 hours of operation.
"Sleep 3" operation mode
In the cooling mode, the set temperature will be increased by 1°C after one
hour of operation, then increased by 2°C after 2 hours of operation, then
decreased by 2°C after 6 hours of operation, and then decreased by 1°C after
7 hours of operation.
In the heating mode, the set temperature will be decreased by 2°C for 1 hour,
then decreased by 2°C after 2 hours of operation, then increased by 2°C after
6 hours of operation, and then increased by 2°C after 7 hours of operation.
To Next Page
Loading...
Need help?
General
