Hisense HWFE7510 User Manual

17 18
Because of influences like these, the time remaining in the programme run is
recalculated, and updated if necessary. In addition, during the filling phase, the
washing machine determines the load and if necessary adjusts the initial
programme time displayed accordingly. During such update periods, an animation
appears on the time display.
FAULT DESCRIPTION TABLE
Digital display
(if fitted on your machine)
Fault description
"F01"
"Water supply fault"
"F03"
"Draining fault"
"F04" "F05"
"Electrical module"
"F13"
"Door lock fault"
If a failure code "F01"and "F02" appears on the display:
press the start/pause button to cancel the failure code and start the " "
programme;if the fault persists,unplug the appliance and contact After-Sales
Service(see After-Sales Service )." "
.
If a failure code "F03" appears on the display:
Switch the appliance off and Check whether drain pump is blocked or drain
hose is tied; if the fault persists, unplug the appliance and contact After-Sales
Service(see After-Sales Service )." "
.
AFTER-SALES SERVICE
Before contacting After-Sales Service:
Restart the programme to check whether the problem has solved itself.
If the washing machine continues to function incorrectly, call After -Sales
Service.
.
.
.
Try to remedy troubleshoot the problem yourself(see Troubleshooting "
Guide").
IMPORTANT:
Ensure that the water has cooled before draining the appliance. In addition,
place a large container in front of the filter to collect water flowing from the filter.
The drain hose is frozen up.
Plug in the appliance again.
.
.
"F06" "F07"
"UNB" "Unblance"
Select and start the " Drain " programme and restart the desired programme. If the
-
-
fault occurs again, please contact After Sales Service (see "After Sales Service").
Error code
The appliance stops during the programme.
For models with a remaining time display, a failure code between "F01" to "F07" and
"F13"or "UNB"appears on the display.
If a failure code between"F04" to "F07" appears on the display:
Switch the appliance off and select the desired programme; if the fault persists,
unplug the appliance and contact After-Sales Service(see After-Sales Service )." "
.
If a failure code "F13" appears on the display:
Check whether the door is closed or not and press the start/pausebutton; " "
if the fault persists, unplug the appliance and contact After-Sales Service(see
After-Sales Service )." "
.
If a failure code "UNB" appears on the display:
Switch the appliance off and rearrange the clothes, then select the spin
programme and start; if the fault persists, unplug the appliance and contact
After-Sales Service(see After-Sales Service )." "
.
"F02"

Hisense HWFE7510 Specifications

General

Brand	Hisense
Model	HWFE7510
Category	Washer
Language	English