9
4.Operation and functions
4.1 Display controls
OFF
Use your appliance according to the following control regulations, your
appliance has the corresponding functions and modes as the control panels
showed in the pictures below.
When the appliance in powered on for
the first time, the backlighting of the
icons on display panel starts working.
If no buttons have been touched and
the doors are closed, the backlighting
will turn off after 60 seconds.
Caution! When you set a
temperature, you set an average
temperature for the whole refrigerator
cabinet. Temperatures inside each
compartment may vary from the
temperatures displayed on the panel,
depending on how much food you
store and where you place it. High or
low room temperature may also affect
the actual temperature inside the
appliance.
The control panel consists of two
areas about temperature, one area
about different modes.
4 Operation and functions
To Next Page
Loading...
Need help?
General
