10
Basic Features
You can adjust:
Tuner Mode - Select the TV signal source. You can select
Antenna or Cable.
Auto Channel Search - Scans for channels that have
signals and stores the channels information in memory.
Digital Channels: The scanned TV program in digital
signals.
Analog Channels: The scanned TV program in analog
signals.
Channel Skip - You can hide channels in the channel list.
Press [▲/
▲
] to select the channels you want to hide and
press [ENTER] to confirm.
Using the Channels Menu
Using the Audio Menu
You can adjust:
Sound Mode - Select the Sound Mode: Standard, Theater,
Music, Speech or Custom.
Balance - Adjust the volume of the left and right speakers.
Equalizer - Soften or enhance the sound at specific
frequency points.
Auto Volume Control - Automatically adjusts volume to a
consistent level; attenuates loud passages.
TV Speakers - Selects where to play TV audio. You
can select On (default setting) to play audio through TV
speakers, or select Off to play audio through the speakers
on an external audio system.
Advanced Audio - Access Advanced Audio settings such as
Digital Audio Out, MTS/SAP, Audio Language.
Digital Audio Out: Send digital audio to an external
audio system. You can select PCM, RAW or Off.
PCM: PCM outputs two channel audio regardless of
the input format.
RAW: When the data stream carries Dolby signal,
digital SPDIF outputs Dolby data stream. When the
data stream carries no Dolby signal, it transports PCM
data stream.
MTS/SAP (Analog channels only): Select the default
audio stream, you can select Mono, Stereo or SAP
(Second Audio Program).
Mono: Select this option if there is noise or static on
weak stereo broadcasts.
Stereo: Select this option for programs broadcast in
stereo.
SAP: Depending on the particular program being
broadcast, you can listen to a foreign-language
translation.
Audio Language (Digital channels only) - Change the
default value for audio language.
Reset Audio Settings - Resets all audio settings to the
factory defaults.
Tuner mode
Auto Channel Search
Channel Skip
Favorite List
Channel Labels
Signal Strength
Audio Only
Channels
ENTER
Enter Select
MENU
Previous
EXIT
Exit
Adjust Channel Options
Antenna
AT05-1
Off
Scanning for Channels
MENU
Exit
Status: Scanning Antenna
Digital Channels : 0
Analog Channels : 0
5-1-AT05-1
5-2-AT05-2
5-3-AT05-3
5-4-AT05-4
17
29
45
Channel Skip
ENTER
Enter Select
MENU
Previous
EXIT
Exit
Manual add and skip channels in your program list
Sound Mode
Balance
Equalizer
Auto Volume Control
TV Speakers
Advanced Audio
Reset Audio Settings
Audio
ENTER
Enter Select
MENU
Previous
EXIT
Exit
Adjust settings to affect sound quality
Standard
0
On
On
Digital Audio Out
MTS/SAP
Audio Language
Advanced Audio
ENTER
Enter Select
MENU
Previous
EXIT
Exit
Select digital audio output format
PCM
Stereo
English
To Next Page
Loading...
Need help?
General