Hitachi 13GA1B User Manual

CHANNEL MEMORY
The autoprogramming function may store weak channels or channels with interference. The CHANNEL MEMORY func-
tion is used to erase undesired channels such as those described above or to store previously erased channels.
For example, to add or erase channel l l.
1). Press the MENU button.
2). Select "SET UP", "INITIAL SETTING" and "CHANNEL MEMO-
RY e (Fig. 1) and press the ENTER button.
3). Select the channel 1 1 to be added or erased by using the CHANNEL
UP/DOWN (A/_F) buttons or CHANNEL NUMBER buttons.
4 ). Select between ADD or ERASE by using the MENU SELECT
LEFT/RIGHT (4/') buttons. (Fig. 2,Fig. 3)
5). If more than one channel is to be added or erased, repeat 3) and
4) for a different channel.
ILL
SET UP I
INITIAL SETTING
l. AIR/CABLE
2. AUTOPROGRAM
,3. CHANNEL MEMORY]
Fig. 1
CHANNEL MEMORY
CHANNEL ',1 1',
r ......
:ERASE', ADD
PRESS _. • TO SELECT
Fig. 2 (CH erased)
• CHANNEL MEMORY
r--_
CHANNEL _1 1 ;
,°_J
ERASE IADD',
PRESS • • TO SELECT
Fig. 3 (CH added)
6). Press the MENU button.
@

Hitachi 13GA1B Specifications

General

Brand	Hitachi
Model	13GA1B
Category	CRT TV
Language	English