Hitachi 51F510 User Manual

30
USING THE REMOTE TO CONTROL DVD FUNCTIONS
Operating the precoded function for your DVD player.
This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of
your DVD player (refer to page 32 for pre-codes).
1. Turn ON your DVD player.
2. Aim the remote control at the front of your DVD player.
3. To switch to DVD pre-coded mode, press and release the DVD button.
4. Hold down the DVD button on the remote and enter the two digit preset code that matches your DVD player, as shown on page 32.
Release the DVD button.
5. Aim the remote at the DVD player and press the POWER button. The remote will turn off your DVD player when the correct two
digit preset code is entered. When this occurs, the remote control is programmed for your DVD player. If the DVD player does not
turn off, try a different two digit preset code.
6. The remote will now control your DVD player.
7. You will need to set the display type of your DVD player to 16:9 widescreen.
NOTES:
1. If your DVD player cannot be operated after performing
the above procedures, your DVD player’s code has not
been precoded into the remote.
2. In the unlikely event that your DVD player cannot be
operated after performing the above procedures, please
consult your DVD player operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
 DVD button
This button allows the remote to control your DVD player by
setting it to DVD mode.
 PRECODED DVD Buttons
These buttons transmit the chosen precoded DVD codes.
 EXCLUSIVE TV Buttons
These buttons are for operating the TV.







MY DVD PLAYER CODE IS:
NOTE: Refer to instruction manual of the DVD player for operation of the buttons exclusively for the DVD player.
THE REMOTE CONTROL

Hitachi 51F510 Specifications

General

Brand	Hitachi
Model	51F510
Category	Projection TV
Language	English

Summary

IMPORTANT SAFETY INSTRUCTIONS

SAFETY POINTS OVERVIEW

Key safety tips for operating your Hitachi television, including warnings and cautions.

POWER SOURCE AND CONNECTIONS

GENERAL SAFETY GUIDELINES

Comprehensive instructions covering installation, operation, and maintenance to prevent hazards.

FIRST TIME USE

INITIAL SETUP GUIDE

Instructions for antenna connection, TV placement, and optimal viewing conditions.

FRONT PANEL CONTROLS AND JACKS

REAR PANEL JACKS AND CONNECTIONS

CONNECTING EXTERNAL AUDIO SOURCES

CONNECTING EXTERNAL VIDEO SOURCES

Instructions for connecting various video sources like VCRs, DVD players, and HDTVs.

THE REMOTE CONTROL

REMOTE CONTROL OVERVIEW AND MODES

TV OPERATION WITH REMOTE

Explains how to use basic TV functions such as power, pause, aspect ratio, and input selection.

PICTURE-IN-PICTURE (PIP) FUNCTIONS

REMOTE CONTROL PROGRAMMING

Guides on programming the remote to control cable boxes, satellite receivers, DVD players, and VCRs.

ON-SCREEN DISPLAY (OSD)

VIDEO SETTINGS ADJUSTMENTS

Covers picture adjustments including Picture Mode, Contrast, Brightness, Color, Tint, and Sharpness.

AUDIO SETTINGS ADJUSTMENTS

ASPECT RATIO AND CHANNEL MANAGEMENT

LOCKS AND PARENTAL CONTROLS

SETUP OPTIONS

RECEPTION PROBLEMS

COMMON RECEPTION ISSUES AND SOLUTIONS