Hitachi C 10FCH2 User Manual

5
English
To keep the double insulation system effective, follow these precautions:
* Only HITACHI AUTHORIZED SERVICE CENTER should disassemble or assemble this power tool, and only genuine HITACHI replacement parts
should be installed.
* Clean the exterior of the power tool only with a soft cloth moistened with soapy water and dry thoroughly.
* Never use solvents, gasoline or thinners on plastic components; otherwise the plastic may dissolve.
SAVE THESE INSTRUCTIONS
AND
MAKE THEM AVAILABLE TO OTHER USERS
AND
OWNERS OF THIS TOOL!
OPERATION AND MAINTENANCE
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. Some
illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool.
NAME OF PARTS
MODEL C10FCH2/MODEL C10FCE2
Fig. 1
Fig. 2
Dust bag
Handle
Lower guard
Fence (A)
Table insert
Turn table
Side handle
Saw blade
Fence (B)
Motor head
Indicator (A)
(For miter scale)
Rotation
direction
Motor
Lever
Vise assembly
Laser marker
(Only C10FCH2)
Indicator (B)
(For bevel scale)
Gear case
Sub fence (B)
Trigger switch
Locking pin
Nameplate
Base
Clamp lever
Holder (B)
Switch
(for Laser marker)
(Only C10FCH2)
01Eng_C10FCH2_US 6/15/07, 19:095

Hitachi C 10FCH2 Specifications

General

Input power	1520 W
Power source	AC
Blade bore	30 mm
Blade diameter	255 mm
Idle speed (max)	5000 RPM
Sound power level	95 dB
Bevel setting (left)	45 °
Miter setting (left)	52 °
Sound pressure level	108 dB
Cutting capacity 45° miter	40 x 102 mm

Weight and Dimensions

Depth	628 mm
Width	460 mm
Height	561 mm
Weight	12000 g