EasyManuals Logo
Home>Hitachi>Saw>C 18DSL

Hitachi C 18DSL Handling Instructions

Hitachi C 18DSL
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
English
An unprotected, coasting blade will cause the saw to walk backwards,
cutting whatever is in its path.
Be aware of the time it takes for the blade to stop after switch is released.
PRECAUTIONS ON USING CORDLESS CIRCULAR SAW
1. Always charge the battery at a temperature of 10 – 40°C.
A temperature of less than 10°C will result in over charging which
is dangerous. The battery cannot be charged at a temperature
higher than 40°C.
The most suitable temperature for charging is that of 20 – 25°C.
2. When one charging is completed, leave the charger for about
15 minutes before the next charging of battery.
Do not charge more than two batteries consecutively.
3. Do not allow foreign matter to enter the hole for connecting the
rechargeable battery.
4. Never disassemble the rechargeable battery and charger.
5. Never short-circuit the rechargeable battery. Short-circuiting the
battery will cause a great electric current and overheat. It results
in burn or damage to the battery.
6. Do not dispose of the battery in re.
If the battery is burnt, it may explode.
7. When using this unit continuously, the unit may overheat, leading
to damage in the motor and switch. Please leave it without using it
for approximately 15 minutes.
8. Do not insert object into the air ventilation slots of the charger.
Inserting metal objects or in ammables into the charger air
ventilation slots will result in electrical shock hazard or damaged
charger.
9. Using an exhausted battery will damage the charger.
10. Bring the battery to the shop from which it was purchased as soon
as the post-charging battery life becomes too short for practical
use. Do not dispose of the exhausted battery.
11. Wear earplugs to protect your ears during operation.
12. Always hold the handle of the power tool rmly. Otherwise
the counterforce produced may result in inaccurate and even
dangerous operation.
13. Do not use saw blades which are deformed or cracked.
14. Do not use saw blades made of high speed steel.
15. Do not use saw blades which do not comply with the
characteristics speci ed in these instructions.
16. Do not stop the saw blades by lateral pressure on the disc.
17. Always keep the saw blades sharp.
18. Ensure that the lower guard moves smoothly and freely.
19. Never use the circular saw with its lower guard xed in the open
position.
000Book_C18DSL_ChS.indb 28000Book_C18DSL_ChS.indb 28 2015/3/3 13:21:362015/3/3 13:21:36

Other manuals for Hitachi C 18DSL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi C 18DSL and is the answer not in the manual?

Hitachi C 18DSL Specifications

General IconGeneral
BrandHitachi
ModelC 18DSL
CategorySaw
LanguageEnglish

Related product manuals