Chapter 2. Installing the Server in the Rack Cabinet 2-1
Chapter 2. Installing the Server in the Rack Cabinet
2.1. Installing a Hitachi DS7020 Server
D013 DANGER
D013:
The server weighs 40 kg when fully populated. Two people are required
to unpack it and install it in the cabinet.
Important The server is delivered fully populated. It is mandatory to
use a lifting device to install it.
However, it is possible to reduce the server weight by
removing the components from the compute box.
See Appendix Installing a Lightened Server, on page A-1
Required screws, nuts and washers
See Appendix Nuts, Screws and Washers, on page B-1
Required tools
T25 Torx screwdriver
Flat screwdriver
Lifting device
To Next Page
Loading...
Need help?
General