Chapter 2. Installing the Server in the Rack Cabinet 2-21
2.4. Installing a Hitachi DS7160 Server
D055 DANGER
D055:
The server weighs 415 kg when fully populated.
Required screws, nuts and washers
See Appendix Nuts, Screws and Washers, on page B-1
Required tools
T10 Torx screwdriver
T20 Torx screwdriver
T25 Torx screwdriver
PH1 Cross-headed screwdriver
Flat screwdriver
Lifting device
2.4.1. Installing the rails for the Hitachi DS7080 Server Assemblies
Procedure
1. Prepare the rails
1. Loosen the four screws of each rail.
To Next Page
Loading...
Need help?
General