– 11 –
FAN OPERATION
FAN SPEED (AUTO)
.....
When the AUTO fan speed mode is set in the cooling/heating operation:
You can use the device simply as an air circulator. Use this function to dry the interior of the indoor unit at the
end of summer.
Press the FUNCTION selector so that the display indicates
(FAN).
Press the (FAN SPEED) button.
(HI) : The strongest air blow.
(MED) : Quiet.
(LOW) : More quiet.
(SILENT) : Silent.
Press the
(START/STOP) button. Fan operation starts with a
beep.
Press the button again to stop operation.
START
STOP
1
2
For the heating operation
● The fan speed will automatically change according to the temperature of
discharged air.
● As room temperature reaches the preset temperature, a very light breeze
will blow.
● Operation starts in the “HI” mode to reach the preset temperature.
● As room temperature approaches the preset temperature, fan speed
automatically switches to "LOW".
For the cooling operation
RAS/RAC-PH30HLT (1-16).indd 11RAS/RAC-PH30HLT (1-16).indd 11
To Next Page
Loading...
Need help?
General
