Hitachi PH Series User Manual

– 13 –
ECO OPERATION
■ Energy saving operation by changing set temperature and by limiting the maximum power consumption value.
By pressing the (ECO) button during Heating, Automatic
Dehumidifying or Cooling operation, the air conditioner performs
the “ECO” operation.
Press (ECO) button during operation.
● “ ” is displayed on the LCD.
● Energy saving operation will start by changing the set
temperature higher or lower and saving operation power
consumption.
Press
(START/STOP) button.
● Press (ECO) button again.
● “ ” disappears from the LCD.
● In case the power consumption is already low, ECO operation will not reduce the power consumption.
● By pressing (POWERFUL) button, ECO operation is cancelled.
● After auto restart, ECO operation is cancelled and previous operation mode shall start.
NOTE
RAS/RAC-PH30HLT (1-16).indd 13RAS/RAC-PH30HLT (1-16).indd 13

Hitachi PH Series Specifications

General

Brand	Hitachi
Model	PH Series
Category	Air Conditioner
Language	English