26
Multifunctional settings
SETUP Menu
Item Description
KEYSTONE
Adjust the Keystone (Vertical) Distortion:
Upper in the data
Lower in the data
memo The adjustable range of this function will vary with the type
of input signal. At some signals, this function may not work well.
memo When the V:INVERT or the H&V:INVERT is selected
under the MIRROR item, if the projector screen is inclined or if the
projector is angled downward, this function may not work correctly.
memo When the WIDE is selected under the ASPECT item of the
IMAGE menu, this adjustment is ignored.
memo When the zoom adjustment is set to the TELE side, this
correction may be excessive. This function should be used with
zoom set to WIDE whenever possible.
WHISPER
Select the NORMAL or the WHISPER using the ▲/▼ buttons. :
NORMAL
WHISPER
When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
IRIS Adjust the iris using the ▲/▼ buttons. : Bright
Dark
MIRROR
Select a mirror status using the ▲/▼ buttons. :
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
With the SETUP menu, items shown in the table below can
be performed. Perform each operation in accordance with
the instructions in the table below.
MENU
[
RGB
]
:SELECT
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MENU
KEYSTONE
WHISPER
IRIS
MIRROR
+0
NORMAL
100
NORMAL
To Next Page
Loading...
Need help?
General