Parameter Settings for Keypad Entry
Appendix C
C–12
C082 [OI] input span calibration Factory set Factory set Factory set
C083 [O2] input span calibration Factory set Factory set Factory set
C085 Thermistor input tuning 105.0 105.0 105.0
C086 [AM] terminal offset tuning 0.0 0.0 0.0
C087 [AMI] terminal meter tuning 80. 80. 80.
C088 [AMI] terminal offset tuning Factory set Factory set Factory set
C091 Debug mode enable 00 00 00 Do not
edit
C101 Up/Down memory mode selection 00 00 00
C102 Reset mode selection 00 00 00
C103 Restart mode after reset 00 00 00
C111 Overload setting (2)
Rated current
for each
inverter model
Rated current
for each
inverter model
Rated current
for each
inverter model
C121 [O] input zero calibration Factory set Factory set Factory set
C122 [OI] input zero calibration Factory set Factory set Factory set
C123 [O2] input zero calibration Factory set Factory set Factory set
“C” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FE (Europe) -FU (U.S.) -FR (Japan)
To Next Page
Loading...
Need help?
General