To Next Page

To Previous Page

8.5 WIZARD START-UP CONFIGURATION

Once the design and installation of the system has been carried out, please set the controller following the wizard indication.

After starting-up the system for the rst time, the controller remains in a “Connecting” state, waiting for the indoor unit to send the

following parameters:

• Operation mode: Heating only or heating and cooling

• Model type: YUTAKI S, S COMBI, S80 or M.

This waiting state takes 25 seconds roughly:

After this “Connecting” state is nished, the LCD wizard makes the following questions:

CODE Description Default Value Range Steps Units Application

Notes

Controller Conguration S SC S80 M

Current

language

Select the language

of the controller

English

PC-ARFHE PC-ARFHE-01 PC-ARFHE-02

English

Spanish

French

Italian

German

tbc tbc - - ○ ○ ○ ○ -

- Adjust Date and Time - - - - ○ ○ ○ ○ -

Assistant

type

Select the

conguration method

Conguration

Assistant

Conguration Assistant

Advanced Conguration

- - ○ ○ ○ ○ -

If the selected Assistant type is “Conguration Assistant” it starts the Assistant questions, if “Advanced Conguration” is selected it

jumps to the detailed list of parameters that can be congured.

UNIT CONTROLLER

PMML0335A rev.1 - 04/2016

118

Hitachi YUTAKI S Series User Manual

Other manuals for Hitachi YUTAKI S Series