Seats
Front Seat
Adjust the seat position by pulling
up on the adjustment lever under
the front edge of the seat cushion,
and sliding the seat to the desired
position. Then release the lever and
make sure the seat is locked in
position by moving it back and forth.
ADJUSTMENT
LEVER
The angle of the seat-back can be changed by pulling up on the lever
at the outside edge of the seat and leaning forward or back. Release
the lever and let the seat lock into place when it reaches the desired
angle.
Seat belts are most effective when the driver and passenger are
sitting up straight and well back in each seat.
RELEASE LEVER
Do not adjust the driver's seat while the car is moving; the seat
could move suddenly, causing loss of vehicle control.
To reduce the risk of siding under the seat belts in a collision,
the seat-backs should be reclined no more than is necessary for
comfort.
Pull up
Pull up
To Next Page
Need help?
General
