Wiper Blades
For maximum visibility, replace worn or cracked wiper blades when
you notice they do not wipe the windshield cleanly or smoothly.
To Replace Worn-out Blades
1. Detach the blade assembly from
the arm by pressing the lock tab
in, then pushing the blade toward
the base of the arm.
METAL SUPPORT
2. Firmly grasp the end of the blade
rubber and pull until the tabs are
free of the metal support.
TABS
3. Remove the metal retainers from
the worn-out blade rubber and
put them in a new blade rubber.
RETAINERS
4. Insert the new blade rubber from
the opposite side of the blade
tabs and position the tabs in the
metal support.
Press Lock
Tab in
Push
Pull out
To Next Page
Loading...
Need help?
General
