The factory installed tires on your car were selected to match the
car's performance capabilities and to provide the best combination
of handling, ride comfort and tread wear.
We recommend that you get the same size, type, and grade of tires
when replacement is necessary. If your tires have an all-season
tread design, the model name will be followed by the marking: "M +
S" (mud and snow) or "all-season".
If you decide not to get the same brand of tires as those originally
installed, you should make sure that the replacements are the radial
type, of the same size, load range and speed rating as the original
tires.
If you have any questions about your car's tires, please contact
your Honda dealer.
Inflation Pressures
The tire label in the glove box lists recommended tire pressures for
carrying loads up to the limit shown. (Tire pressures are also listed
on the back cover of this manual.)
These pressures were chosen to provide you with the best combi-
nation of tread life, riding comfort and stability under normal driving
conditions.
Improper inflation can reduce both tire life and load carrying
capacity. Check the tire pressures at least once a month, including
the spare.
Lower pressure than recommended lets the tread and side walls flex
too much, causing increased tire temperatures, uneven wear, and
poor handling. Pressure higher than recommended can make the tire
too stiff, increasing the chance of damage from road hazards, and
also causing uneven wear.
Tires
TIRE LABEL
To Next Page
Loading...
Need help?
General
