The second row bucket seat on the
passenger’s side can be moved to the
center to provide access to the third
row seat.
Remove the two floor covers
between the bucket seats in the
second row by carefully prying on
the back edge of the covers with a
flat-tipped screwdriver.
Unlock the seat from the floor by
pulling the lock release lever under
the seat cushion’s front edge and
lifting the rear of the seat.
Slide the seat toward the center of
the vehicle.
Push the back of the seat down over
the floor hooks. Make sure the seat
is securely locked in place.
CONTINUED
Moving the Second Row Bucket
Seat
Seats
Instruments and Controls
117
LOCK
RELEASE
LEVER
To Next Page
Loading...
Need help?
General
