CONTINUED
Thecoolingsystemshouldbe
completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
Honda All Season Antifreeze/
Coolant Type 2.
Draining the coolant requires access
to the underside of the vehicle.
Unless you have the tools and
knowledge, you should have this
maintenance done by a skilled
mechanic.
Turn the ignition ON (II). Turn
the heater temperature control
dial fully clockwise or set the
climate control system to
90°F (32°C). Turn the ignition off.
Openthehood.Makesurethe
engine and radiator are cool to the
touch.
Remove the radiator cap.
Loosen the drain plug on the
bottom of the radiator. The
coolant will drain through the
splash guard. Drain the coolant
into an appropriate container.
1. 3.
2.
Replacing Engine Coolant
Cooling System
Maintenance
303
DRAIN PLUG
DRAIN BOLT
To Next Page
Loading...
Need help?
General
