Unhook the front of the seat from
the floor by pulling it back slightly,
then pivoting it upward.
Always remove an unlocked seat
from the vehicle before driving. A
seat that is not locked in place could
fly around and cause injury in a
sudden stop or crash.
Both seats can be removed to give
more cargo capacity.
To remove a seat:
Pull up the seat-back angle
adjustment lever, and fold the seat-
back forward.
Unlock the seat from the floor by
pulling the lock release lever under
the seat cushion’s front edge and
lifting the rear of the seat.
To reinstall the seat, hook the front
of the seat to the floor, then push the
back into the locks. Make sure both
the front and the back of the seat are
securely latched before driving.
Removing the Bucket Seats in the
Second Row
Seats
Instruments and Controls
119
LOCK RELEASE LEVER
To Next Page
Loading...
Need help?
General
