The Select/Reset knob on the
instrument panel controls the
brightness of the instrument panel
lights. Turn the knob to adjust the
brightness.
Separate adjustments can be made
when the headlights are on and off.
You will hear a beep when maximum
or minimum brightness is reached.
You will also hear a beep when the
maximum level is canceled by
turning the knob a click to the left.
The level of brightness is shown on
the multi-information display
(Touring models) or on the
information display (LX, EX and
EX-L models) while you adjust it. It
goes out 5 seconds after you finish
adjusting.
To reduce glare at night, the instru-
ment panel illumination dims when
you turn the light switch to or
. Turning the Select/Reset
knob fully to the right until you hear
a beep will cancel the reduced bright-
ness.
Instrument Panel Brightness
142
BRIGHTNESS LEVEL
SELECT/RESET KNOB
Touring model is shown
０６／０７／２６ １７：４０：４４ ３１ＳＨＪ６２０ ０１４７
To Next Page
Loading...
Need help?
General
