Your vehicle has a memory feature
for the driver’s seat position. Store a driver’s seat position only
when the vehicle is parked.
Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
Adjust the seat to a comfortable
position (see page ).
Two seat positions can be stored in
separate memories. You select a
memorized position by pushing the
appropriate button or appropriate
remote transmitter (Driver 1 or
Driver 2).
Press and release the MEMO
button on the driver’s door. You
will hear a beep. Then, both
indicators in the memory buttons
will start to blink. Press and hold
one of the memory buttons (1 or
2) within 5 seconds after you press
the MEMO button. When the
system completes storing a new
driving position, you hear two
beeps. The indicator in the stored
memory button will come on.
This setting can be linked or
unlinked with the remote transmitter.
For more information, see page .
You can change the ‘‘MEMORY
POSITION LINK’’ setting in the
multi-information display (see page
).
1.
2. 3.
173
119
154
CONTINUED
On Touring model only
Storing a Driving Position in
Memory
Driving Position Memory System
Instruments and Controls
185
MEMO BUTTON
MEMORY
BUTTONS
INDICATORS
０６／０７／２６ １７：４６：４９ ３１ＳＨＪ６２０ ０１９０
To Next Page
Loading...
Need help?
General
