If your vehicle gets stuck in sand,
mud, or snow, call a towing service
to pull it out (see the previous page).
For very short distances, such as
freeing the vehicle, you can use the
detachable towing hook that mounts
on the anchors in the front and rear
bumpers.
Remove the cover, put cloth on the
edge of the cover and carefully pry
with a small flat-tip screwdriver or
a metal fingernail file.
Remove the towing hook and
wheel nut wrench placed behind a
cover under the cargo area.
Screw the towing hook into the
hole, and tighten it with the wheel
nut wrench.
The cover is attached to the
bumper with a tether.
1. 2.
3.
If Your Vehicle Gets Stuck
536
Front
COVER
WHEEL NUT
WRENCH
TOWING HOOK
０８／０３／１０ １８：３９：２４ ３１ＳＺＡ６００ ０５４１
To Next Page
Loading...
Need help?
General
