CONTINUED
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area that is
far away from the traffic lanes.
Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
The tools are in the trunk. Open
the trunk and raise the trunk floor
by lifting up on the back edge.
Take the tool kit out of the trunk.
Unscrew the wing bolt and take
the spare tire out of its well.
If you are towing a trailer, unhitch
the trailer.
Park the vehicle on firm, level and
non-slippery ground. Put the
transmission in Park (A/T) or
reverse (M/T). Apply the parking
brake.
5.
4.
3.
2.
1.
Changing a Flat Tire
Taking Care of the Unexpected
265
TRUNK FLOOR
SPARE TIRE JACK
TOOL KIT
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
０６／０７／０７ １５：４６：５９ ３１ＳＤＮ６４０ ０２７０
To Next Page
Loading...
Need help?
General
