Seat Removal
Refer to Safety Precautions on page 25.
Remo
val
1. Remove the seat bolts (1).
2. Remove the seat (2) by sliding it backward.
(1) seat bolts
(2) seat
Installation
1. Install the seat (2) while aligning the seat
front prong (3) with the seat bracket (4) and
seat rear prongs (5) with the tabs (6) of the
frame.
2. Install and tighten the seat bolts to the
specified torque.
19 lbf·ft (26 N·m, 2.7 kgf·m)
(1) seat bolts
(2) seat
(3) seat front prong
(4) seat bracket
(5) seat rear prongs
(6) tabs
(1)
(2)
(3)
(5)
(2)
(1)
(4)
(6)
36 Servicing Your Honda
To Next Page
Loading...
Need help?
General
