Removing & Installing Body Components
Battery
#
Removal
Make sure the ignition switch is in the
(Off) position.
1.
Remove the battery lid. 2 P. 92
2.
Disconnect the negative - terminal from
the battery.
3.
Disconnect the positive + terminal from
the battery.
4.
Remove the battery, taking care not to
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first.
Make sure bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected. 2 P. 36
For proper handling of the battery, see
“Maintenance Fundamentals.” 2 P. 82
“Battery Goes Dead.” 2 P. 126
Maintenance
91
Positive
terminal
Battery
Negative
terminal
To Next Page
Loading...
Need help?
General
