Honda Aircraft Company
HA-420 OPERATING PROCEDURES
POM AND TECHNIQUES
HJ1-29000-005-001
October 30, 2016 3-7
and corresponds to the appropriate label on the center console next to the
speedbrake control lever.
SPEEDBRAKE (if installed)………RET
Some checklist items refer to multiple user interfaces (panels and
switches) or specific areas on the displays and these appear in checklists
with initial capitalization convention as seen here.
Flight Guidance……………………As required
Finally, the response to some checklist items requires several sub-steps.
These expanded sub-steps are listed in the AFM, but they may not appear
in the QRH or electronic checklist. In these cases, the response step
immediately follows the checklist item with no ellipses (…). The
response appears in parentheses as seen here.
Avionics / Flight Data (Set/Entered)
The AFM normal checklist procedures will specify “Normal” when a
switchlight is dark (nothing illuminated) in normal operations.
Otherwise, the AFM will show the required position in capital letters, for
example “OFF” or “NORM” for switchlights.
Abnormal indications appear as amber in switchlights, for example,
amber “OFF.” Rotary switches are referenced by the label of the desired
position in capital letters. In most cases, selection of a switch or actuation
of a control provides tactile feedback and visual indication on the
corresponding display, and proper checklist discipline should include
verification of both. For example, set the parking brake handle and verify
the parking brake indication appears on the Aircraft Systems and
Information (ASI) display.
FOR TRAINING PURPOSES ONLY
To Next Page
Loading...
General