Name: Honda HRC216HXA
Brand: Honda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SERVICING YOUR LAWN MOWER

CONTROL CABLE ADJUSTMENTS

Blade Control Lever Adjustment

1. Push the button down on the blade control lever and measure free

play at the top of lever.

Free play should be 3/4 ~ 1 in (20 ~ 25 mm). If adjustment is

necessary:

2. Loosen the lock nuts with a 10 mm wrench, and move the adjuster

up or down as required.

3. Tighten the lock nuts and recheck free play.

4. Start the engine outdoors. Move the throttle to FAST. Operate the

blade control lever. The blades should engage when you push the

lever forward and the blades should stop quickly when the lever is

released.

If the blades do not start or stop as it should with the correct cable

adjustment, take the mower to an authorized Honda servicing

dealer for repair.

BLADE CONTROL

LEVER

3/4 ~ 1 in

(20 ~ 25 mm)

LOCK NUTS

ADJUSTER

Questions and Answers:

Need help?

Do you have a question about the Honda HRC216HXA and is the answer not in the manual?

Honda HRC216HXA Specifications

General