EasyManuals Logo

Honda HRC216HXA User Manual

Honda HRC216HXA
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
TAKING CARE OF UNEXPECTED PROBLEMS
55
VIBRATION PROBLEMS
MOWING AND BAGGING PROBLEMS
Possible Cause Correction
Grass and debris lodged under mower deck. Clean out the mower deck. (page 26)
Blades loose, bent, misaligned, damaged, or
unbalanced by improper sharpening.
Tighten loose blades bolts. (page 33)
Replace damaged blades. (page 32)
Mechanical damage, such as a bent
crankshaft.
Take the mower to an authorized Honda
service dealer for repair.
Possible Cause Correction
Engine speed is too slow to cut well. Move the throttle lever to the FAST position.
(page 19)
Mower is moving too fast for lawn conditions. Shift to slow speed. (page 21)
Adjustment levers set at different positions. Set all the levers at the same cutting height
position. (page 16)
Grass bag overfilled or clogged. Empty the grass bag. Wash the grass bag if it is
clogged with dirt. (page 34)
Mower deck clogged. Clean out the mower deck. (page 26)
Blades dull, worn, or damaged. Sharpen or replace the blades if necessary.
(page 32)
Wrong blades installed. Install correct blades. (page 32)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda HRC216HXA and is the answer not in the manual?

Honda HRC216HXA Specifications

General IconGeneral
EngineHonda GCV160
Engine Displacement160cc
Cutting Width21 inches
Drive TypeSelf-Propelled
Deck MaterialSteel
StarterRecoil
Cutting Height Adjustments7 positions
Mulching CapabilityYes
Bagging CapabilityYes
Rear DischargeYes
Cutting Height Range3/4 to 4 inches
TypeWalk Behind
Drive SystemHydrostatic
HandleAdjustable
Blade TypeTwin blades (MicroCut System)
Wheel Size9 inches

Related product manuals