Name: Honda HRC216HXA
Brand: Honda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

TRANSPORTING

BEFORE LOADING

If the engine has been running, allow it to cool for at least 15 minutes

before loading the mower on the transport vehicle. A hot engine and

exhaust system can burn you and can ignite some materials.

1. If installed, remove the grass bag.

2. Put the throttle in the STOP

position.

3. Turn the fuel valve to the OFF

position. This will prevent carburetor

flooding and reduce the possibility of

fuel leakage.

LOADING AND UNLOADING

If a suitable loading ramp is not available, two people should lift the

mower on and off the transport vehicle while holding the mower level.

Position the mower so all four wheels are on the bed of the transport

vehicle. Tie the mower down with rope or straps, and block the wheels.

Keep the tie-down rope or straps away from the controls, adjustment

levers, cables, and the carburetor.

STOP

OFF

FUEL

VALVE

Questions and Answers:

Need help?

Do you have a question about the Honda HRC216HXA and is the answer not in the manual?

Honda HRC216HXA Specifications

General