Operational Procedures
3. Hold handle bar firmly. Pull the starter rope lightly until you
feel resistance, then pull briskly.
NOTE: Do not allow the rope to snap back. Return it by
hand to prevent damage to the starter.
4. If the choke was used to start the engine, move the throttle
lever to the FAST position as soon as the engine warms
up enough to run smoothly without use of the choke.
5. For best engine performance, it is recommended that the
engine be operated with the throttle in the FAST position.
Clutch lever operation:
HRU216SU & HRU216DSU
The mower will only move forward when
the clutch lever is squeezed against the
handle bar.
The drive stops when the lever is
released.
Gear lever operation:
HRU216SU & HRU216DSU
The gear lever has three positions enabling the
speed of the mower to be varied according to
the requirements of the operator and the
conditions.
Ensure you are familiar with the mower speeds in
each gear prior to the commencement of mowing.
NOTE: The speed must only be changed
when the mower is stationary.
Release clutch lever before changing
gears.
12
1
2
3
CLUTCH LEVER
SLOW
FAST
To Next Page
Loading...
Need help?
General
